HELP WITH BLOCK

Subject: HELP WITH BLOCK Fri Mar 23, 2012 7:20 pm

Hello people I'm having a few issues with my b16a2 not to long ago it started consuming a lil more oil and one of my buddy's said every time I slam on the accelerator a cloud of smokes comes out. I had a few mechanics take a look at it and they all said I might have bad piston ring should I replace or change the block any suggestions ...... Thank a lot

Just settling in Posts : 11 Join date : 2012-03-06

-needs new rings, blocks fine( most likely ), will need honed out- or bored out if it's really bad. new bearings etc.

Subject: Re: HELP WITH BLOCK Sat Mar 24, 2012 3:15 am

do a compression check and leak down test first before jumping to conclusions..

Subject: Re: HELP WITH BLOCK Sat Mar 24, 2012 12:04 pm

1crazy93k wrote:: do a compression check and leak down test first before jumping to conclusions..

This. These tests will allow you pin point the cylinder in question and based on how a gauge reads, will allow you to determine if the problemis in the bottom end or the head.

Subject: Re: HELP WITH BLOCK Mon Mar 26, 2012 1:48 am

Thanx guys I'll get on that ....

» Ken Block: Gymkhana 1, 2, 3, & 4